for Fire suppression system, co2 system fire fighting system, fire protection system - clean agent electrical fire suppression system, Kitchen fire suppression Call@ 9971365130, 9990360705
CNC Machine Fire Suppression
a complete detection & suppression system for CNC machines
What is CNC Machine Fire Suppression?
Fire Engineering Technology supply and install a series of Automatic Fire Suppression Systems which are specifically designed to protect all types of industrial machinery such as CNC machines. This gives you peace of mind that you are not only meeting all current NFPA guideline and NBC code : Chapter iv- Fire and life Safety Regulations in the workplace, but more importantly you are protecting your operators from the risk of machinery fire.
Automated machines such as CNC machines are often left unattended to operate for long periods or even to run throughout the night. If there was a fault, a safety cut out would probably stop the machine running, but what would happen if a fire broke out whilst it was unattended? Or even if the operator was there but the fire was severe?
This would be a major fire risk, however installing an Automatic Fire Suppression System would remove this, safely extinguishing the fire, protecting both life, machinery and buildings.
Key Points:
A complete system, ready to be installed
Pre-engineered for CNC machines
Design to be used with CO2 extinguishing agent (cylinders are unfilled when delivered)
Cylinders supplied in both 4.5Kg and 9Kg sizes
Also suitable for use with the Master Control Unit system
Our Automatic Fire Suppression Systems use our specially designed linear detection tubes which are installed in all areas at risk around the machine. This means that a fire can quickly be detected without the use of conventional electronic detectors, therefor removing the need for any independent power supply or battery back-up but more importantly it means the system is utterly reliable as there are minimal components.
A simple explanation of how Automatic Fire Suppression Systems work is that the detection tubes are filled with nitrogen to the correct pressure which will hold the extinguisher valves in the closed position. If a fire breaks out the temperature will increase, this causes the nitrogen to expand and the pipe to burst, allowing the extinguisher valve to open.
As CNC Machines are used for a range of applications, FET can provide you with the correct type of extinguishant to suit your set-up. In addition to this, the Automatic Fire Suppression System can easily be integrated to work in conjunction with the machines own emergency stop circuit, alarm or extraction system. So for example, if the tube burst through fire, or there was a loss of nitrogen, reducing the pressure, an additional switch connected to the nitrogen filled tube would be triggered, causing the machine to automatically stop.
- electrical fire suppression
- kitchen fire suppression
- vehicle fire suppression
Electrical Cabinet Fire Suppression
a complete detection & suppression system for electrical cabinets
What is Electrical Cabinet Fire Suppression?
We are surrounded by electrical devices, sockets, boards and cabling within buildings, but within business or industrial buildings these can present a hidden danger. Often, especially in industrial buildings or high amounts of IT equipment such as server room, the equipment places a high load on the electrical system and many of the components within the system are hidden or inaccessible. Although electrical fire is often accidental, it presents a very real risk to life or loss of business, so protecting your employees or assets from this fire risk is very important.
Fire Engineering Technology supply and install Automatic Fire Suppression Systems superficially designed to protect you from all types of electrical fires. Our patented detection tubing is installed around equipment, panels and cable runs, detecting fire quickly and with accuracy, extinguisher the danger before the fire spreads and damages nearby equipment. This gives you complete peace of mind that even if you cannot see the cables or equipment, our Automatic Fire Suppression System is watching over them for you.
Key Points:
Easy / flexible installation
Quick & effective suppression
Highly reliable: no electricity or moving parts
Highly economical
Automatic Fire Suppression Systems rely on a change in pressure from a heat source in order to trigger the extinguishant. Rather than having a separate power supply or battery back-up with complex digital detectors, the pneumatic system has very few moving parts, making the system very simple and therefor extremely reliable. We can also supply a range of on-conductive extinguishants depending upon your application needs – these extinguishants are especially designed to not damage electrical items or components and they do not leave any residue.
Fire Engineering Technology systems install the detection tubing throughout the enclosure, or where ever it is required, this is then connected to the cylinder valve. The tubing is filled with nitrogen to a specified pressure, it is this pressure that holds the extinguishant in the cylinder. If there is a change in temperate, such as a fire, the pressurised tubing will expand and burst resulting in the extinguishant being dispensed directly from the burst section in the tube onto the fire.
Although this technology is simple, it is extremely effective as it means the fire created a discharge nozzle by breaking the tube so it is always exactly in the right location to extinguish the fire.
An additional switch is also added to the system and is held closed by the pressure of the nitrogen in the tube. If the tubing were to burst or a sudden drop in pressure in the tube, the switch will open which sends a signal to isolate the power and raise an alarm.
Our Automatic Fire Suppression Systems are also ideal for server racks or server rooms and can easily be fitted to the existing equipment. The system can be set up to protect individual racks in cupboards or remote locations, or scaled up for use in Data centres with multiple racks being protected by one common cylinder. The system can also be used to protect UPS and cooling equipment.
- electrical fire suppression
- kitchen fire suppression
- vehicle fire suppression
Fume Cupboard Fire Suppression
a complete detection & suppression system pre-engineered for fume cupboards
What is Fume Cupboard Fire Suppression?
In most laboratories there is a high risk of fire breaking out and one area of particular risk, due to the nature of heat rising, are fume hoods and cupboards. It’s within these areas you can usually find ignition sources, for example volatile chemicals, Bunsen burners etc which pose a particular danger to fire starting and spreading.
Typically fume hoods and cupboards would be covered by a traditional fire alarm system and connected to sprinklers. Whilst a sprinkler system is usually effective at containing a fire, it can cause extensive water damage to the building or in the case of chemical related fires, actually spread the fire.
In addition to this, often when a fire breaks out in a fume hood or cupboard, the heat and the fire follow the air out of the extraction exhaust which can cause the fire to spread rapidly, which in turn may delay the sprinklers from activating.
Rather than let the fire reach this stage, using a Fire Engineering Technology installed Fire Suppression System the fire can be suppressed and extinguished at it’s source, before it spreads beyond the ignition area and far quicker than a conventional fire alarm and sprinkler system.
Key Points:
Easy / Flexible installation
Quick & effective suppression
Highly reliable: no electricity or moving parts
Highly economical
Fire Engineering Technology supply and install a range of Automatic Fire Suppression Systems which are specifically designed for reducing the risk of fire in a variety of fume cupboards. The system uses our unique tubing which is run throughout the fume cupboard in the areas at risk. The tubing not only reacts very quickly to fire, it also extinguishes the fire rapidly before it can spread.
Our system does not rely on complicated electronic detectors or sensors, it has very few moving parts making it not only cost effective but most importantly extremely reliable. The tubing run throughout the fume cupboard is filled with nitrogen and it is this pressure that holds the valve closed to the extinguisher. At the point the temperature rises, the gas expands and bursts the pipe, this releases the valve and sends the extinguisher rushing to the broken section of tube, or in other words, the heat source. We have a wide range of extinguisher available depending upon your application type, please contact us for more details and information.
- kitchen fire suppression
- vehicle fire suppression
a complete detection & suppression system pre-engineered for commercial kitchens
What is Kitchen Fire Suppression?
It’s widely accepted that a kitchen, whether it is domestic or commercial, contains many potential fire hazards and an accident or fault within a kitchen is frequently the cause of fires within the INDIA. None more so than fires caused by oil in fryers which are particularly dangerous as they can remain extremely hot long after use and the operator has moved away from them.
Due to the highly combustible nature of hot oil, it is truly frightening the speed and ferocity a fire can spread in the kitchen, endangering the lives of not only those within the kitchen but those within the building. Many of these life threatening fires could be prevented or controlled by installing a simple, but highly effective Automatic Fire Suppression System from Fire Engineering Technology.
Key Points:
Easy / flexible installation
Quick & effective suppression
Highly reliable: no electricity or moving parts
Highly economical
Our Automatic Fire Suppression systems are specifically designed to extinguish kitchen fires quickly and effectively, deploying extinguishant designed for use on hot oil. The small, self-contained fire suppression system requires no external power source and can be installed within an adjacent cupboard or directly inside a suitable extractor hood so that it is not in the way or obtrusive. Fire Engineering Technology use the patented linear detection tubing which is installed throughout the risk area and connected to the cylinder valve. The tubing is then filled with nitrogen and this pressure is utilized to hold back the extinguisher in the cylinder.
Should a fire occur the pressurized tubing will burst and the extinguisher will be deployed from the fixed diffusers onto the fire. This will effectively neutralize the problem and extinguishing the fire rapidly.
a complete detection & suppression system for vehicles
What is Vehicle Fire Suppression?
ehicles are not only expensive to purchase, but they can also be essential for your business or have strong sentimental attachment, so the prospect of loosing a vehicle due to engine fire could be catastrophic, not to mention the obvious risk to life.
Whether your vehicle is a commercial vehicle, a restored classic or a modified special, if a fire takes hold it could leave you stranded or worse still, damage the vehicle beyond repair, so protecting it from fire risk with an Automatic Fire Suppression System is a sensible precaution.
Fire Engineering Technology supply and fit a range of Automatic Fire Suppression Systems that are ideal for protecting motor vehicle engine compartments. We install our patented linear detection tubing which is fed around the engine compartment, giving complete protection. This tubing can not only quickly and accurately detect a fire but also extinguish it before it can damage components around the source of the fire.
Key Points:
Protects passengers and valuable equipment
Easy / flexible installation
Quick & effective suppression
Highly reliable: no electricity or moving parts
Highly economical
Fire Engineering Technology Automatic Fire Suppression System does not rely upon complex electronic detectors etc, it is able to operate simply using automatic detection. This removes the need for separate power supplies or battery backups and also makes the entire system fail safe as there are very few moving parts. All of our systems are hassle free to install and can be fitted in a timely efficient manner. Our system uses a patented linear detection tube which is installed around the engine bay and connected to the cylinder valve. The tubing is then filled with nitrogen or compressed air and this pressure is measured precisely to so that the extinguishant does not flow out of the cylinder.
Should a high temperature or fire occur then the pressurized tubing will burst and the extinguishant will flow directly from the burst hole and extinguish the fire. Because the extinguishant flows out the hole created, this effectively becomes a discharge nozzle, meaning the fire is hit at the precise place it has occurred. There is an optional switch that can also be added to the system and again, this is held closed by the pressure in the tube. If the tube bursts or the pressure be lost for any reason, the switch will open and this signal can be used to isolate the engine.
The direct low pressure (DLP) system utilizes Fire Detection Tubing as both the fire detection device and the fire suppression delivery system, The portion of the tube nearest the hottest point of the fire ruptures forming an effective discharge "Nozzle". The pressure drop in the tube release the entire contents of the cylinder through this nozzle.
Gases Used : Novec 1230, FM 200, HFC227ea, FK-5-1-12 etc called Clean agent.
Detection Medium : Flexible polymer detection tube.
Applications :
Electrical cabinets and Controls, Computer Racks, PLC & Process automation control cabinets, Critical data processing equipment, UPS Cabinet, Medical equipment and Switchgears.
With the indirect low pressure (ILP) System, The fire detection tubing is used only as a detection device. the fire suppression agent is delivered via copper tubing, Stainless steel tubing or Braided hose Once the tube "bursts". The suppressant is discharged through strategically placed pre defined Nozzle within the protected enclosure.
Detection Medium : Flexible polymer detection tube,
Suppression : Through pre defined nozzle supported through hose & Piping.
Agents : CO2, Wet Chemical, Clean agents and Powder.
Applications : Industrial Equipment, Forklifts, Paint machinery equipment protection, Paper pulping machines, farming equipment, Fume cabinet, Chemical Storage etc.
Off Road automatic fire suppression for vehicles such as Airport Ground Support Equipment, Port Cranes, Loading Shovels and Forklifts, all have a punishing life and are there to get a job done. If they are not operating or are subject to a total loss due to a fire, their downtime can have a huge impact to the entire operation, whether it is an airport, container port or construction site.
These vehicles will have many flammable liquids on board such as the hydraulic fluid, diesel fuel, gasoline and lubricating oils. When combined with the heat of the turbochargers, manifolds and braking systems which can be exaggerated from their demanding schedules, they are ideal for fire conditions to start and derail your operation.
A simple way of protecting your investment is to provide an on-board vehicle Automatic fire suppression system in the Dual Agent configuration. Not only will it be able to provide rapid fire knockdown minimizing fire damage and downtime, but it will also protect those superheated surfaces from reigniting.
we are manufacturer of Clean agent based Gas suppression system using all types Gas Like Novec 1230, FM 200, FK-5-1-12, HFC227ea & CO2 Gas.
Broadly speaking, there are two methods for applying an extinguishing agent: total flooding and local application:
Systems working on a total flooding principle apply an extinguishing agent to a three dimensional enclosed space in order to achieve a concentration of the agent (volume percent of the agent in air) adequate to extinguish the fire. These types of systems may be operated automatically by detection and related controls or manually by the operation of a system actuator.
Systems working on a local application principle apply an extinguishing agent directly onto a fire (usually a two dimensional area), or into the three dimensional region immediately surrounding the substance or object on fire. The main difference in local application from total flooding design is the absence of physical barriers enclosing the fire space.
In the context of automatic extinguishing systems, local application generally refers to the use of systems that have been emplaced some time prior to their usage rather than the use of manually operated wheeled or portable fire extinguishers, although the nature of the agent delivery is similar and many automatic systems may also be activated manually. The lines are blurred somewhat with portable automatic extinguishing systems, although these are not common.
Common Application :
Server room gas flooding system, Paint Booth gas suppression system, Battery room fire suppression system, Storage area fire protection System.
Gases Used : Novec-1230, FK-5-1-12 Gas, HFC227ea gas, FM-200 Gas, CO2 Gas and Inert gases etc.
There's much to see here. So, take your time, look around, and learn all there is to know about us. We hope you enjoy our site and take a moment to drop us a line.
clean agent novec 1230 gas suppression Delhi Haryana Bengaluru
Our direct release systems utilize heat and flame sensitive Fire Finder Detection Tubing as a detection device and for suppressant delivery.